Titre Maxidrill

After 15 years of development, the MaxiDrill is today a reference on the market.

Users testimonies

The best clearance on the market
to work fast in all conditions

English title for the photo
The Maxi Drill is made for high drilling speed, and for working later at fall and earlier at spring.
PNG - 278.3 kb
3 produits
In a single pass, the Maxi Drill is able to seed 3 products, at 3 different rates, and dissociating 2 different seeding depht, on all rows or one row out of two, two rows out of three. The Maxi Drill could fertilizer in the furrow, or plant two products in the same seeding line.
JPEG - 205.7 kb

The drill that make the difference
at the end of seasons

On the folding Maxi Drill range, the 2 functions soil consolidation and transport wheels are separated.

The folding Maxi Drill range has in standard a real transport axle. The packer roller is not in use at all during the transport on the road, to prevent a risk of damage.
During work, the transport axle stay out of the ground.

Up to 120 kg per disc

Two rows of identical leaf spring mounted coulters provide up to 120kg per coulter for consistent penetration and seeding depth even in tough conditions.
This system allows a large clearance between each seeding lines.
The Maxi Drill is fitted depressurisers to vents the air pressure and allows seeds to drop under their own weight into the soil reducing bounce and the risk of uneven seed depth.

Cultidisc seeding line

A machine created to work well and fast

The Maxi Drill has been thought to take high constraints due to important work speed. This drill is able to work des sols travaillés superficiellement ou plus profond, ou bien en direct.
JPEG - 196.1 kb

Optimal soil following

The Maxi Drill discs are mounted with independent arm to respect perfect soil following.
With this system the preparation of the seed bed is then more accurate because only the disc concerned by an obstacle individually retracts.

Independant disk
Doseur REMPLACER

A precise metering unit

The Maxi Drill has a stainless steel metering mechanisms very precise : from 1 to 450 Kg/Ha to 10 km/h in wheat.
Calibration test is automatized and needless to change flutes when using different seed.

Fast emptying of hoppers

With a 2 parts folding, you can empty the whole hoppers in a big-bag : a real time saving !

Vidange Maxidrill
Roue REMPLACER

Access to the wheels

The roller has twin-mounted wheels equipped with scrapers. Each pair is staggered.
This assembly allows saving up to 25% of absorbed power. The roller can work under humid conditions without stuffing chances. Finally, changing the wheel in case of flat tire will not take you more than a few minutes. All you have to do is to revolve the concerned pair of wheels.

Our record : 58 seconds with 2 people !

2 separated air circuits

> No sorting between a small seed and a big seed
> No risk of blocking between the fertiliser and the seed
> Management of two different depths
> No risk of shoot burn with certain fertilisers
> If the fertiliser clogs, the seed keeps on flowing

2 circuits séparés

Fertisem : 2 configurations

Maxi V1

V1 : Fertisem pipe integrated in frame behind 2nd disc-row.
Fertilizer dropped in lines or strips between seeding rows.

Maxi V2

V2 : Fertisem pipe integrated behind skim coulter,
2 adjustable drilling dephts in the same furrow.

Technical Data

Maxidrill 3010
Maxidrill 3000 BE
Maxidrill 4010
Maxidrill 4000 BE
Maxidrill W4010
Maxidrill W4000 BE
Maxidrill W6010
Maxidrill W6000 BE
Working widht 3m 4m 4m 6m
Transport widht 3m 4m 3m 3m
Distribution Pneumatic Pneumatic Pneumatic Pneumatic
Hopper capacity 3 000 liters 3 000 liters 3 000 liters 4 100 liters
Volume repartition
(with Fertisem)
60/40 : 1 760 l + 1 240 l
45/55 : 1 440 l + 1 560 l
95/5 : 2 900 l + 100 l
60/40 : 1 760 l + 1 240 l
45/55 : 1 440 l + 1 560 l
95/5 : 2 900 l + 100 l
60/40 : 1 760 l + 1 240 l
45/55 : 1 440 l + 1 560 l
95/5 : 2 900 l + 100 l
60/40 : 2 450 l + 1 650l
45/55 : 1 800 l + 2 300 l
95/5 : 4 000 l + 100 l
Pro Hopper capacity 120 liters 120 liters 120 liters 120 liters
Row spacing 15 cm 14,3 cm 14,3 cm 15 cm
Weight
(without options)
4 200 kg 5 550 kg 6 750 kg 8 350 kg
Number of rows 20 rows 28 rows 28 rows 40 rows
Number of discs 24 discs 32 discs 32 discs 48 discs
Power required from 105 to 150 hp from 120 to 180 hp from 140 to 200 hp from 210 to 300 hp
Tire dimensions axle (series) - - 600/50 R22,5 700/40 R22,5
Number of distributors
DE / SE
1 SA + free return oil line for fan
1 DA for setting and lifting
1 SA for markers
1 SA + free return oil line for fan
1 DA for setting and lifting
1 SA for markers
1 SA + free return oil line for fan
1 DA for folding
1 DA for markers
1 DA for axle
1 SA + free return oil line for fan
1 DA for folding
1 DA for markers
1 DA for axle
Filling height 248 cm 260 cm 260 cm 290 cm

Leaflet to download

Photos Gallery